Designed to meet the strictest requirements for a K9 tracking harness, we started by using mil-spec 1 ¾” webbing, most commonly used in parachute harnesses, which is quick drying, mold and mildew resistant and strength rated to 7,000 lbs. Using our Patrol Harness as the design foundation, we added a strap and ISC Klick-Lock buckle in the rear to add support for the K9 so that they can be safely lifted over obstacles, as well as preventing them from being able to back out of their harness. A V-Ring on the rear of the harness as well as the shoulder blade apex gives the handler multiple clip-in options, and also allows the handler to clip the harness into their chest rig if a dog needs to be carried by the handler.
The V-Rings are strength rated to 6,000 lbs and can be clipped with any commercially available attachment option including large diameter climbing carabiners. The 1 3/4″ ISC Wales Klick-Lock buckle provides a secure and redundant attachment point that can be quickly detached but has recessed buttons that prevent accidental unclipping when grabbed at the buckle by the handler or a suspect. The use of Velcro covered Molle on the left and right sides of the harness allows the handler to attach accessories, pouches or affix department or unit identifiers.
This harness has not been strength rated for rappelling.
Hover over a description to highlight the feature
Heavy Duty Mil-Spec Webbing
We use the same type of webbing the military uses for construction of parachute harnesses throughout the entire harness design which is quick drying, mold and mildew resistant and strength rated to 7,000 lbs.
ISC Klick-Lock Buckles
Klick-Lock Buckles are redundant, meaning both sides have to be depressed to release the buckle and the release buttons are recessed which prevents accidental unclipping.
Our large handle gives you complete manual control of your dog and can be used to lift the dog over obstacles.
Padded Chest Plate
Padding at the center of the chest provides comfort and safety for the K9.
Additional Supporting Straps
A second strap secures at the base of the dog's rib cage and an extension from the chest plate keeps it in place. This creates a more stable and safer method of carrying your dog, and keeps the dog from ever backing out of the harness.
Molle and Velcro
The 5” wide x 4” tall Molle Panels we sew onto each side allow the handler to attach accessories and pouches to the harness while the integrated Velcro allows for department or unit patches to be easily attached.
Front Chest Strap: 24-31in (61-79cm)
Rear Chest Strap: 22-26in (56-66cm)
Length between straps: 6in (15cm)
Front Chest Strap: 30-35in (76-89cm)
Rear Chest Strap: 25-30in (64-76cm)
Length between straps: 7.5in (19cm)
Measure your dog’s front strap chest girth directly behind the front legs and rear strap chest girth at the base of the rib cage
ISC 1 3/4″ Klick-Lock Buckles rated to 4,000 lbs
1 3/4″ Mil-Spec Webbing rated to 7,000 lbs
V-Ring Clip-in Points rated to 6,000 lbs
MADE BY HAND IN THE U.S.A.
NOT RATED FOR CLIMBING OR RESCUE APPLICATION